This can be a retro styled analog wall clock made from wood MDF with paper cover. This clock will add charm to any room in your house. There is a plastic shell casing at the back of the clock for batteries. Only one AA battery is required for this clock (not included). This vintage wall clock can be a good gift at housewarmings, weddings, and social gatherings.
1.There is an instruction picture in the last image,please fix hands set with the instrcution.
2.Hands are seperated from the clock for safety of long transportation.You wish to have install them by yourself.Do not fret. Steps are so easy.You just put all the hands on the core shaft in turn,1,Hour hand,2,Minutes hand,3,Second hand. Hands should parallel.Then put 1 AA battery,the clock can work.
3.The clock is unframed and no glass face as the cover.If the touch each other,You’ll be able to adjust the hands to avoid the hands touching.If the hands drop down,Do not fret,they are just loose，just press hands tight on the core shaft to make the hands parallel,then the hands will not drop and will keep time.
4.Once in a while the movement is not work just for the flawed place of the second hand.The red second hand is too deep or too shallow will effect the movement.You’ll be able to pull the red second hand out and then add it again,then clock work well.
1* Wooden clock
2* Hands set ( Hour hand,minute hand,second hand)
* 1.The clock is unframed, and there is not any glass face as the cover.
* 2.There are slight difference between the picture and the real item caused by light brightness.
* 3.Because the batteries is limited by interenational transport , the battery is no contain, please pay attention.
Measures:11.81″ X 11.81″
Movement: 5168s Scanning Quartz Movement, more quiet
Material: Wooden MDF,wood particle board painted,Covered by paper drawing, no frame nor glass cover
1 AA Carbon Zinc or Heavy Duty battery, not Alkaline battery (not included in the package)